The Project : The factory building of Astral Polytechniks Ltd. needed proper ventilation with plenty of flow of fresh air, which would require least possible artificial lighting. Apart from that, the focus was on improving the drainage system to prevent blockages, leakages and minimize maintenance. Tata Structura hollow sections provided the perfect solution to the design requirements and met the client's exacting brief.

Structural Designer : Vyomesh Shah
 
Architect : Viral Munshi
 
Fabricators : K. B. Mehta Construction Pvt. Ltd.

Specifications : Total quantity of hollow section used - 500 tonnes

Members : 180 x 180 x 4, 72 x 72 x 3.2, 49.5 x 49.5 x 2.6, 60 x 60 x 2.6, 113.5 x 113.5 x 4.8,  122 x 61 x 3.6,  91.5 x 91.5, 25 x 25 x 2

Project Pictures :

Background to the Project : To set up a state-of-the-art Coal Washery for supply of washed coal with approx 54% ash content, to APGEMCO ( Andhra Pradesh Power Generating Company ). The coal will be used in their power plants.
 
The installed capacity of the Coal Washery Is 11 million tonnes per annum of washed coal. Around 1200 MT of steel has been used In the project and the total quantity of steel hollow sections used Is 1000 MT.

Structural Designer : Jayanta Kumar Mukherjee
 
Client : M/s Spectrum Coal & Power Ltd.
 
Fabricators : M/s Sri Durga Fabricators of Cuttack
 
Gallery Specifications : 25 mtr span, Belt width 1200, 1400 mm, Depth of Girder 2200 mm, Total width 3000 mm for 1200 mm belt, For Rapid Loading system, Double Conveyor, Gallery Belt, 1200 mtr width each for 750 mtr length (approx) has been constructed

Specifications : Total quantity of hollow section used - approx. 1200 MT

Members : 132 x 132 x 5.4, 113 x 113 x 4.8, 91.5 x 91.5 x 4.5, 72 x 72 x 4.0, 60 x 60 x 4.0, 32 x 32 x 3.2

 

Project Pictures :

The Project : Over a hundred cold storages have been designed and constructed In Gujarat using Tata Structura steel hollow sections. All these cold storages are Identical In look and design. Tata Structura sections have ensured a design convenience and optimum value for money.

Structural Designer : Naresh Kalyan Shah
 
Fabricators : Thackre C

Specifications : Total quantity of hollow section used - 40 tonnes

Members : 110 x 110 x 12, 91.5 x 91.5 x 4.5, 135 x 135 x 30, 132 x 132 x 5.4, 350 x 350 x 12, 230 x 230 x 10, 50 x 50 x 6, 75 x 75 x 8, 122 x 61, 96 x 48

Project Pictures :

The Project : The KH5 Machineries Ltd factory building at Hirapur, Ahmedabad exhibits many innovations in terms of structure and architecture. Over 600 tonnes of weather-resistant Tata Structura steel box hollow sections have given this structure a rare grandeur.
 
The four sheds at the factory building span 27 meter span and a height of 16 meters. The 20 ton crane inside the factory site on the cantilever columns of almost 7 meter high, which is free from the main steel portal. This unique design separates vertical sheeting and windows from any vibrations of the crane. The glazed gable end and windows at the crest of the porta make It energy efficient.
 
Steel hollow sections with copper content have been used here for the first time In India.

Structural Designer : Anal Shah
 
Architect : HCP Design & Project Management Limited
 
Fabricators : B.P.C. Projects

Specifications : Total quantity of hollow section used - approx. 600 tonnes

Members : 132 x 132 x 5.4, 72 x 72 x 3.2, 49.5 x 49.5 x 2.9

Project Pictures :

The Project : The factory shed of Machtech at Baroda has used approximately 150-175 tonnes of Tata Structura steel hollow sections In a unique manner, optimizing usage of the sections. It Is the first time that Tata Structura boxes have been used to set heavy cranes.

Structural Designer : Sallesh Desai
 
Architect : Saunrachna Consulting Engineers
 
Fabricators : Krishna Fabricators

Specifications : Total quantity of hollow section used - approx. 150 - 175 tonnes

Members : 180 x 180 x 5, 72 x 72 x 3.2, 172 x 172 x 5.4, 49.5 x 49.5 x 3.6, 122 x 61 x 3.6, 91.5 x 91.5 x 3.6, 38 x 38 x 3.2

Project Pictures :

Background to the Project : The roof of the industrial building for Nordson India Put. Ltd. needed to be both strong and sleek at the same time. There had to be detailing in joints and trusses which were required to support one crane of 2 tonnes or two cranes of 1 ton capacity. Roofing sheets had to be supported as well.
 
Tata Structura provided the perfect solution to the client's exacting requirements.

Structural Designer : Dr. Sanatkumar P. Rajamane
 
Client : Nordson India Pvt. Ltd.
 
Fabricators : Sannidhi Technologies Inc.

Specifications : Total quantity of hollow section used - approx. 100 tonnes

Span : 35.54 m

Project Pictures :

The Project : Tata Structura hollow sections were widely used in construction of the Taloja warehouse at the pre-englneerlng stage. There was no fabrication at all on the site. All the members were fabricated at a workshop, avoiding welding at site. The warehouse is a totally bolted structure where each element has contributed to the overall economy, helping to save time and money.

Architect : Ravi Lyer
 
Fabricators : Positron

Specifications : Total quantity of hollow section used - approx. 90 tonnes

Members : 180 x 180 x 6, 66 x 33 x 2.6, 180 x 180 x 5, 145 x 82 x 4.5, 72 x 72 x 3.2, 80 x 40 x 4, 32 x 32 x 2.6, 113.5 x 113.5 x 4.8, 96 x 48 x 3.2

Project Pictures :